Micro Denier Pre Wetted Wiper 9x9 Knit Microfiber IPA Presaturated Wipes

Micro Denier Pre Wetted Wiper
,Pre Wetted Wiper 9x9
,Microfiber ipa presaturated wipes
Knit Micro-Denier Microfiber 9x9inch Pre-Saturated 70% IPA Cleanroom Wipes
Product Detail:
Sustainable pre-wetted cleanroom wipers are made from 100% upcycled microfiber material with a sealed edge, processed on Myesde fully automated manufacturing system.
Technical Data:
Attribute; (units) | Value ** | Test Method | ||
Basis weight; nominal (g/m2) | 120 | MSD-QI-QS-007 A0 | ||
Absorbency in water | IEST-RP-CC004.3 | |||
Intrinsic; (mL/g) | 2.41 | |||
Extrinsic; (mL/m2) | 290 | |||
Sorptive rate; (seconds) | 1 | IEST-RP-CC004.3 | ||
Non-volatile residue, NVR | IEST-RP-CC004.3 | |||
In deionized water; (g/m2) | 0.014 | |||
In isopropanol; (g/m2) | 0.012 | |||
Specific ions | IEST-RP-CC004.3 | |||
Sodium; (ppm) | 0.025 | |||
Chloride; (ppm) | 0.076 | |||
Potassium; (ppm) | 0.094 | |||
Particles, readily releasable | ||||
APC: ≥0.3μm(Ea/ft3) | 92 | IEST-RP-CC003.3 | ||
LPC:≥0.5μm(106/m2 ) | 16 | IEST-RP-CC004.3 |
Benefits:
Excellent chemical compatibility.
Applies IPA efficiently while minimizing VOC emissions.
Exceptionally clean.
Available in resealable pouches and zipper packs.
Material:
• 100% Polyester
• Microfiber(70%Polyester and 30% Nylon)
• 100% Melt-blown fabric(PP)
• 55%Woodpulp and 45% Polyester
Technical Data:
The data is based on the polyester material.
Cleanroom Environment:
• ISO Class 3 – 8
Shelf Life:
• Non-Sterile (Dry) –3 years from date of manufacture
• Non-Sterile (Pre-Wetted) – 2 years from the date of manufacture
• Sterile – 2 years from the date of manufactue
Features:
1.Pre wetted wiper can control the amount of solvent released on the surface of the object,in line with the requirements of wiping;
2.It can reduce the amount of solvent and its evaporation,so that the solvent is controllable;
3.Healthier and safer working environment,reduce the release of volatile organic compounds, greatly reduce environmental pollution;
4.It can reduce the fire and its potential harm caused by solvent leakage
5.Reduce the generation of particles and fibers, reduce in the spray painting, sealing, welding, paint construction of defective products, so that the wiping process is more standardized, eliminate the replacement of operators, bring aboutthe uncertainty of product quality control, greatly reduce the cross pollution in the process of cleaning.
Product Information: